AWS CWI Part A – WIT Chapter 3

AWS CWI Part A – WIT Welding Inspection Technology Chapter 3- Metal Joining and Cutting Processes- Latest 32 Question and Answers

1.

Which of the following is a function of the flux coating of a SMAW electrode?

 
 
 
 

2.

In the AWS system of SMAW electrode designations, the next to the last digit refers to:

 
 
 
 

3.

Which of the following is an incorrect statement about a SMAW electrode designated as E7024?

 
 
 
 

4.

Of the following which is not an essential part of a typical SMAW system?

 
 
 
 

5.

Which of the following welding problems is the result of a distorted magnetic field that deflects the welding arc?

 
 
 
 

6.

Which of the following is not considered a type of metal transfer for GMAW?

e. pulsed arc

 
 
 
 

7.

In the electrode designation system for FCAW, the second digit (1) in an electrode marked (E71T-5) refers to:

 
 
 
 
 

8.

Which of the following is not always an essential element of an FCAW system?

e. work lead

 
 
 
 

9.

What aspect of the GTAW and PAW processes makes them different from the other arc welding processes?

 
 
 

10.

Shielding for the GTAW and PAW processes is primarily accomplished through the use of:

e. none of the above

 
 
 
 

11.

A green stripe on a tungsten electrode designates:

 
 
 
 

12.

When welding aluminum with the GTAW process, what type of welding current is most commonly used?

 
 
 

13.

SAW and ESW processes are similar in that:

d. a and b above
e. a and c above

 
 
 

14.

The diagram below depicts what welding process?

 
 
 
 

15.

Solidification cracking due to improper width-to-depth ratio of the weld bead is a serious problem primarily with which welding process?

 

 
 
 
 

16.

Which one of the following processes is typically used in the flat position unless special apparatus is employed?

 
 
 
 
 

17.

Which of the following are not common to both GTAW and PAW?

 
 
 
 

18.

What technique is employed with PAW to produce full penetration welds without a bevel edge preparation?

 
 
 
 

19.

What welding process produces welds in a single pass, with the progression uphill along the joint?

 
 
 

20.

Which of the following is not an advantage of the ESW process?

 
 
 
 

21.

Which welding process is considered to be a chemical welding process?

 
 
 
 

22.

Which arc welding process provides a very efficient means of joining attachments to some planar surfaces?

 
 
 
 

23.

Brazing differs from welding in that:

e. none of the above

 
 
 
 

24.

For satisfactory results, a braze joint should have:

 
 
 
 

25.

Which of the following is an advantage of brazing?

 
 
 

26.

Of the following metals, which cannot be efficiently cut using OFC?

 
 
 
 

27.

Which of the following gases can be used to perform OFC?

 
 
 
 

28.

Which of the following cutting processes can cut any metal?

 
 
 

29.

The width of a cut is referred to as the:

 
 
 
 

30.

The SMAW power source can be:

 
 
 
 

31.

Of the following, which is a noncontact welding process, requires no electrodes, and is not influenced by the presence of magnetic fields?

 
 
 

32.

Which of the following uses a focused beam of electrons as a heat source for fusion welding?

 
 
 
 


 

Click Here To Take The Next WIT Chapter 4>>

99% Passing Guarantee- If you Want to Purchase a Full AWS CWI Course Study Material Please Contact us.
AWS CWI Part A – WIT Welding Inspection Technology Chapter 3- Metal Joining and Cutting Processes- Latest 32 Question and Answers

#CertifiedWeldingInspectors
#CwiPartA
#WIT

For business inquiries: upweld.org@gmail.com
Follow us on Facebook https://www.facebook.com/UpWeld/
Follow us on Twitter https://twitter.com/upweldorg

WIT Chapter 4 latest Question Answer,
Weld Joint Geometry and Welding Symbols Question Answer,
Weld Joint Geometry and Welding Symbols Q&A,
Module 4 AWS CWI QUESTIONS ANSWERS,
AWS CWI Questions and Answers (Module 4) – Part 1,
Welding Symbols Test With Answers,
Module 4 Weld Geometry and Welding Symbols-1,
welding symbols worksheet,
welding symbols test section 4 answer key,
welding symbols and meaning,
welding symbols chart,
welding joints and symbols,
welding symbols Quizlet,
tack weld symbol,
welding symbols test section 4 answer key,
welding symbol examination answer key,
the graphic description of the type of weld is called the,
the height of a weld above the base metal in a groove weld is the,
what does it call the graphic description of the type of weld?,
the height of the weld face above the base metal in a groove weld is called as,
when a weld symbol is centered on the reference line, this indicates,
which of the following do not contain job quality requirements?,

AWS CWI Part A – WIT Chapter 1

Please go to AWS CWI Part A – WIT Chapter 1 to view the test

 

Click Here To Take The Next WIT Chapter 2>>

99% Passing Guarantee- If you Want to Purchase a Full AWS CWI Course Study Material Please Contact us.
AWS CWI Part A – WIT Welding Inspection Technology Chapter 1—Welding Inspection and Certification Question and Answers

#CertifiedWeldingInspectors
#CwiPartA
#WIT

For business inquiries: upweld.org@gmail.com
Follow us on Facebook https://www.facebook.com/UpWeld/
Follow us on Twitter https://twitter.com/upweldorg

WIT Welding Inspection Technology Chapter 1
AWS Welding Inspection Technology
WIT-T:2008 Welding inspection technology
WIT-Chap1-Weld-Inspection | Nondestructive Testing | Welding
Welding Inspection Technology Workbook Fifth Edition
Part A- Welding Inspection Technology
Part A – AWS WIT-T
m1-cwi-questions-answers
welding inspection technology pdf free download
welding inspection technology 2008 pdf
welding inspection technology audiobook
welding inspection technology 2020
welding inspection handbook pdf
american welding society study material pdf
standard welding terms and definitions
Welding Inspection and Certification Question and Answers
AWS CWI Questions and Answers (Module 1)
Cwi Exam With Answer Questions
Questions and Answers for the CWI Exam
Certified Welding Inspector Cwi Part A Fundamentals
AWS-CWI Part A examination questions and answers
Buy Free Questions & Answers for the CWI Exam
Metric Practice for Welding Inspection Questions and Answers
welding inspection questions and answers pdf
cwi exam questions and answers pdf
cswip 3.1 questions and answers pdf 2020
1,001 questions and answers for the cwi exam pdf
welding exam questions pdf
cswip 3.1+multiple choice questions and answers
cswip 3.1: question with answer and explanation
welding symbols questions and answers pdf