Take A Free IRATA Rope Access Level 1 Exam Practice Test – Quiz Course

Take A Free IRATA Rope Access Level 1 Exam Practice Test with the Latest IRATA Questions And Answers.


What does TACS stand for and what is it for?



What parts of OH&S do we follow?



Where do we find our best work practices?



What does IRATA stand for?



After qualifying as an IRATA L1, if a technician does not carry out any industrial rope access for six months they must:



If a harness is covered in paint:



IRATA L1 qualifies you to do only one of the following tasks, which is it?



In order for an IRATA L1 to progress to an IRATA L2 they must have a minimum of:



What should you do before carrying out a rescue?



Ropes and webbing should be stored in:



When planning to carry out a rescue which of the following points should be considered?



Which of the following statements is INCORRECT?



A harness should be load tested:



What are the advantages of the mountaineering style helmet for use in industrial rope access compared to a standard-size helmet?



Tools and equipment are safe for use for rope access if:



Ascending devices can be used in the following situations:



A permit of work should be understood by:



In ascending and descending situations the lifeline is usually:



Items of equipment without any inspection records:



The effects of wear and tear on equipment are:



When marking equipment for use in industrial Rope access you should:



Sitting harnesses are suitable for:



From what material are harnesses and ropes usually made?



A descender should have a thorough examination report:



Which of the following methods would you use to inspect your personal rope access equipment?



Which of the following describes a “comfort seat“:



Rope access equipment should be traceable to relevant test certificates:



In normal use, the Safe Working Load (SWL) of your personal rope access equipment is:



Cows tails are made from which type of rope:



A karabiner is normally marked with:



Before you use any item of rope access equipment you should:



Rope access technicians should check their equipment:



Ascending devices and foot loops should be carried:



Which of these knots can be loaded in three directions?



Knots in device lanyards (cow’s tails):



A karabiner is most dangerous when:



A ‘stopper knot’ is normally used for:



What is the overall minimum strength requirement of a rope access anchor?



A double figure of eight on a bight knot is normally used for:



When part of your work party, you are unsure of the correct function of the pre-rigged rescue system, you should:



When operating a rig for a rescue system all candidates must?



A rig for a rescue system may involve hauling as well as lowering.



Whilst descending with bagged ropes attached to you, what is the main safety consideration?



To prevent an out-of-control swing during a rope-to-rope transfer how many points of attachment are required?



When should a rope access technician rely on only one point of attachment?



What are the main concerns to look out for when approaching and climbing over an edge obstruction on a roof?



The overall minimum and current strength requirement of a re-anchor is?



The backup device shall be placed on the same road as the descending device:



In descending and ascending the main working lines are:



Descending devices should be locked off:



If you are asked to use a rope access maneuver you have forgotten how to do, you should:



What is the most likely outcome of a dynamic fall onto your ascending device?



What knot can be tied mid-rope to isolate a section of minor damage on a rope before continuing descent?



Rope access workers should:



How can you increase friction to slow down your descent?



The failure of a single anchor deviation must not result in damage to ropes.



When would you use a double anchor deviation?



Deviations allow the redirection of the path of the ropes to:



Which point of the harness should a fall arrest lanyard be attached to?



It is acceptable to use 2 single-legged energy absorbing lanyards to claim a structure.



As an IRATA L1, you are qualified to:



When using twin-legged fall arrest lanyards it is acceptable to store the second leg on the harness side D ring.



When working close to the ground using fall arrest lanyards what do you need to consider?



When carrying out rescue does the safety factor on equipment strength?



What does a fall factor measure?



An ‘exclusion zone’ will be set up at a rope access site to:



IRATA rope access training covers the installation and testing of chemical anchor devices.



An IRATA L1 qualification allows you to:


Question 1 of 68

Are You Looking for a Free IRATA Rope Access Level 1 Exam Practice Test?

IRATA Rope Access Level 1 Exam Practice Test
Take A Free IRATA Rope Access Level 1 Exam Practice Test – Quiz Course

If your answer is yes then you are at the right website. Here You Can Take a Free Online IRATA Rope Access Level 1 Exam Practice Test and Improve Your IRATA Level 1 Exam Score. Here You Can Learn everything you need to know about IRATA Level 1 exam quickly and easily.

After completing the last Question you will see the IRATA Rope Access Level 1 Practice Test Answer Key, No cheating now! Once you complete the test and check your answers please leave us your score and any comments in the comments section below

We will help you to pass the IRATA/SPRAT Rope Access Level 1 Exam on the first attempt —99% Guaranteed. Our expert-written IRATA/SPRAT Rope Access Level 1 Examination practice material covers the actual exam topics with fully explained answers.

Take unlimited free IRATA/IRATA Rope Access Level 1 Quiz Course tests of any length. We have free new questions updated every week and you can study our material along with any other study materials.

People also ask

What is the meaning of IRATA or the Full Form of IRATA? or What does IRATA stand for?

Answer: The meaning of IRATA is Industrial Rope Access Trade Association, IRATA is a leading international trade organization for industrial rope access work in the height sector.

How long is IRATA Level 1 Certificate valid?

Answer:  IRATA level Level 1 Certificate valid for 3 years

How much does IRATA training cost? or How much does IRATA Level 1 cost?

Answer:  The Single IRATA or SPRAT training certification course cost is $1,800.
The dual IRATA or SPRAT training certification course cost $2,200.
This cost includes everything, including the certification. 

Note: Costing changes according to time, make sure that whenever you want to do the course, once you go to the official website and check what piece is going on at that time.

Is rope access a good career?

Answer: It’s a fantastic career for those who enjoy working in the great outdoors, frequently in isolated settings, and who have a head for heights.

What is the starting salary for rope access?

Answer: In the UK, the average annual income for a rope access technician is roughly £55,000. However, a beginner rope access technician can expect to make about £32,000 annually, while a more experienced IRATA level 3 qualified rope access specialist can make up to £80,000 annually.

Note: The salary varies over time and is affected by the locations where there is a need for the job. As a result, we are unable to provide any definite information regarding wages.

How do I get IRATA certification? or How do I become certified by IRATA?

After completing a 4-day training course seminar, candidates go for IRATA certification. For IRATA certification, candidates must pass a written exam, an oral exam, and practical exams given by independent IRATA assessors or SPRAT evaluators.

Here you can take free practice tests of the AWS CWI, CSWIP, ASNT NDT, ASME, NACE/AMPP, and API exams with the latest questions and answers.

If you want to get IRATA/SPRAT Rope Access Training and Certification Course, please feel free to contact us.