API 510 Chapter 17

API 510 Chapter 17 -Thirty Open-Book Sample Questions

Try these questions, using all of the codes specified in the API 510 exam ‘effectivity list’. There is little point in guessing the answers – the objective is to see where the answers come from in the codes, thereby increasing your familiarity with the content.

Take a Free API 510 Exam Chapter 17 Practice test with Latest Thirty Open-Book Sample Question and Answers

1.

Question 1
A vessel is constructed to a pre-1999 version of the ASME
construction code. Can it be re-rated to the 1999 version?

 
 
 
 

2.

Question 2
The API philosophy is that temporary repairs should be replaced with permanent repairs

 
 
 
 

3.

Question 3
A procedure is qualified using base material with an S-number.
Which of the following statements is true?

 
 
 
 

4.

Question 4
Which of the following NDE methods would be unlikely to find an edge-breaking lamination in a weld joint

 
 
 
 

5.

Question 5
The inspection interval for all PRVs is determined by:

 
 
 
 

6.

Question 6
Who decides the corrosion rate that best reflects current process conditions

 
 
 
 

7.

Question 7
Providing certain conditions are met, a vessel may be re-rated to:

 
 
 
 

8.

Question 8
Thickness data for a pressure vessel are provided as follows:
Minimum (calculated) thickness = 0.125 in
Current measured thickness = 0.25 in
Measured thickness 4 years ago = 0.50 in
What are the remaining life and the inspection period of the vessel?

 

 
 
 
 

9.

Question 9
Weld repairs to existing stainless steel overlay or clad areas
should consider:

 
 
 
 

10.

Question 10
A pressure vessel has the following data:
. Nameplate stamping RT-2
. MAWP = 280 psig at 690 °F
. S = 13 350 psi
. Actual shell thickness = 0.475 in
. ID = 78.5 in
. Welded joints are all type 1
What is the minimum safe shell thickness to support the rated MAWP of 280 psi?

 
 
 
 

11.

Question 11
For vessels susceptible to brittle fracture, what additional tests should the inspector specifically consider after repair welding is completed?

 
 
 
 

12.

Question 12
A vessel has the following data:
. Elliptical heads joined to the shell by type 1 joints (Cat B) with full RT
. Head ID = 52 in
. Thickness at the knuckle (corroded) = 0.28 in
. S = 13 800 psi
What is the safe MAWP of this head (ignoring any static pressure consideration)?

 
 
 
 

13.

Question 13
For a vessel that has no nameplate, the inspector should specify that a new nameplate is fitted showing:

 
 
 
 

14.

Question 14
RBI assessment should be thoroughly documented in accordance with:

 
 
 
 

15.

Question 15
In API 510, sulphidation is classed as a DM resulting in:

 
 
 
 

16.

Question 16
Which of these is not a material verification (PMI) technique that can be used on-site?

 
 
 
 

17.

Question 17
Plain carbon and other ferritic steels may be in danger of brittle fracture at:

 
 
 
 

18.

Question 18
A vessel constructed of material with a thickness of 0.50 in and UTS of 75 000 psi is to be weld-repaired using weld consumables with UTS of 60 000 psi. If the depth of the weld repair is 0.2 in, what is the total required thickness of the weld deposit?

 
 
 
 

19.

Question 19
A vessel is made from a carbon steel plate (UCS-66 curve A) with a design stress of 17 500 psi. It operates at very low material stress of 100 psi and is made of 1 in the plate that has been spot radiographed. What is the minimum design metal temperature for the material to not require impact testing?

 
 
 
 

20.

Question 20
It is required to investigate whether a scheduled internal inspection on a multizone vessel (with varying corrosion rates)can be substituted by an on-stream inspection. The inspector should:

 
 
 
 

21.

Question 21
If there is a conflict between the ASME codes and API 510 then:

 
 
 
 

22.

Question 22
A nozzle is fitted abutting (i.e. set-on) the vessel wall. What is an acceptable method of attaching it?

 
 
 
 

23.

Question 23
An engineer has passed the NBBPVI inspection examination. Under what conditions can the inspector be awarded an API 510 authorized pressure vessel inspector certificate?

 
 
 
 

24.

Question 24
A vessel has an inside diameter of 30 inches. What is the maximum allowed averaging length for calculating corroded wall thickness?

 
 
 
 

25.

Question 25
What are HIC cracks likely to look like?

 
 
 
 

26.

Question 26
Which of the following is a commonly accepted advantage of the GMAW process?

 
 
 
 

27.

Question 27
How often should an external inspection be performed on an above-ground vessel?

 
 
 
 

28.

Question 28
Which of these vessels in which internal inspection is physically possible, but are in severe corrosive service, may not use an onstream inspection as a substitute for an internal inspection?

 
 
 
 

29.

Question 29
For a vessel that has no nameplate or design/construction information, a pressure test should be performed:

 
 
 
 

30.

Question 30
CMLs should be distributed:

 
 
 
 

Question 1 of 30

Click Here To Read Next API 570 Exam Chapter 19 – The Final Word on Exam Questions 

API 510 Chapter 16

API 510 Chapter 16- The NDE Requirements of ASME V

Please go to API 510 Chapter 16 to view the test

Now try these familiarization questions on ASME V articles 1, 2, and 6.

16.5 ASME V articles 1, 2, and 6: familiarization questions

Now try these familiarization questions covering ASME V articles 7 and 23 (article 9 questions are too easy).

16.8 ASME V articles 7 and 23 familiarization questions

Click Here To Read Next API 510 Chapter 17 -Thirty Open-Book Sample Questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 510 Chapter 15

API 510 Chapter 15 – The NDE Requirements of API 510 and API 577

Step 1: variable table

Please go to API 510 Chapter 15 to view the test

Click Here To Read Next API 510 Exam Chapter 16- The NDE Requirements of ASME V 

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 510 Chapter 14

API 510 Chapter 14- Welding Qualifications and ASME IX

Please go to API 510 Chapter 14 to view the test

Click Here To Read Next API 510 Exam Chapter 15 – The NDE Requirements of API 510 and API 577

Now try these familiarization questions, using ASME IX articles I and II to find the answers.

14.7 ASME IX articles I and II familiarization questions

Try these ASME IX articles III and IV familiarization questions. You will need to refer to your code to find the answers.

14.10 ASME IX articles III and IV familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 510 Chapter 13

API 510 Chapter 13 – Introduction to Welding/API 577

Please go to API 510 Chapter 13 to view the test

Click Here To Read Next API 570 Exam Chapter 14- Welding Qualifications and ASME IX 

Now try these two sets of familiarization questions about the welding processes and their consumables.

13.4 Welding process familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 510 Chapter 12

API 510 Chapter 12 – Impact Testing

Please go to API 510 Chapter 12 to view the test

Click Here To Read Next API 510 Chapter 13 – Introduction to Welding/API 577 

Now try these familiarization questions on impact test exemption.

12.3 ASME VIII section UCS-66: impact test exemption familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 510 Chapter 11

API 510 Chapter 11- ASME VIII and API 510 Heat Treatment

Please go to API 510 Chapter 11 to view the test

Click Here To Read Next API 510 Exam Chapter 12 – Impact Testing

11.4 ASME VIII sections UCS-56 and UW-40: PWHT familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank.
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 510 Chapter 10

API 510 Chapter 10 – ASME VIII Welding and NDE

Please go to API 510 Chapter 10 to view the test

Click Here To Read Next API 510 Exam Chapter 11- ASME VIII and API 510 Heat Treatment

Now try these familiarization questions.

10.6 ASME VIII section UW-11 familiarization questions (set 1)

10.8 ASME VIII section UW-16 familiarization questions (set 2)

10.10 ASME VIII section UW-51/52 familiarization Questions (Set 3)

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

 

API 510 Chapter 9

API 510 Chapter 9 ASME VIII Pressure Design

Please go to API 510 Chapter 9 to view the test

Click Here To Read Next API 510 exam Chapter 10 – ASME VIII Welding and NDE Free Practice test

Now try these familiarization questions on shell and head calculations.

9.6 Set 1: shells/heads under internal pressure familiarization questions

Now try these familiarization questions on MAWP and pressure testing.

9.8 Set 2: MAWP and pressure testing familiarization questions

Now try these familiarization questions.

9.10 Set 3: vessels under external pressure familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank.
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.

API 570 Chapter 8

API 570 Chapter 8 API 576 Inspection of Pressure Relieving Devices

Please go to API 570 Chapter 8 to view the test

Click Here To Read Next API 510 Exam Chapter 9 ASME VIII Pressure Design 

8.6 API 576 familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
99% Passing Guarantee
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.