CSWIP 3.1 Paper Five Questions And Answers

by

Here you can take a free CSWIP 3.1 practice test with the latest CSWIP 3.1 Paper Five Questions and Answers (Multiple Choice).

1.

Stress relieving is not helpful in which of the following cases?

 
 
 
 

2.

Carbon equivalent values are useful to determine:

 
 
 
 

3.

What effect do mid-thickness laminations in steel plates normally have when they are located within a weld heat-affected zone?

 
 
 
 

4.

When referring to TIG welding, the shielding gas could be:

 
 
 
 

5.

The overall length of a pipeline can be affected by:

 
 
 
 

6.

An austenitic stainless steel may suffer:

 
 
 
 

7.

The permanent backing material for MMA welding of low-carbon steel should be made from:

 
 
 
 

8.

A basic electrode would normally:

 
 
 
 

9.

What is the maximum hardness usually recommended for the heat-affected zone of a medium-strength ferritic steel weld?

 
 
 
 

10.

When referring to MIG welding, the shielding gas would be:

 
 
 
 

11.

Which of the following defects is more common to welds deposited by CO2 welding than welds deposited by MMA?

 
 
 
 

12.

Generally, the most suitable method of detecting a lack of sidewall fusion would be:

 
 
 
 

13.

Submerged arc utilizes:

 
 
 
 

14.

Hot shortness is a term used to indicate:

 
 
 
 

15.

Ultrasonics would be preferred over radiography due to:

 
 
 
 

16.

Cobalt as an isotope would generally be used on:

 
 
 
 

17.

MMA welding of low alloy steels is more likely to be performed with:

 
 
 
 

18.

In welding procedure terms, a change in essential variable means:

 
 
 
 

19.

Which defect would you expect to get in TIG welds in non-deoxidized steel?

 
 
 
 

20.

Weld symbols placed on a dotted line in accordance with ISO requirements means:

 
 
 
 

21.

Which of the following defects would you not expect to find by visual inspection of welds?

 
 
 
 

22.

A welding inspector’s main attributes include:

 
 
 
 

23.

The most serious defect types are:

 
 
 
 

24.

Technically, a code of practice is:

 
 
 
 

25.

Which of the following can arise from copper inclusions in a ferritic steel weld?

 
 
 
 

26.

The correct term for ‘cap height’ is:

 
 
 
 

27.

Which of the following is likely to give the highest impact strength in ferritic weld metal?

 
 
 
 

28.

A tensile test will assess:

 
 
 
 

29.

You suspect that ferritic steel plates contain cracks in the prepared edges. What NDT method would you use to check this?

 
 
 
 

30.

The important point of high-temperature steels is that:

 
 
 
 

Question 1 of 30

Empower your CSWIP 3.1 readiness! Access our complimentary practice test featuring the latest Multiple Choice Questions from Paper Five. Boost your prep now. 📝 #CSWIP #ExamPrep #FreeTest

Click here to take Paper Six CSWIP 3.1 Questions And Answers (Multiple Choice)

Leave a Reply