Take Free AWS SCWI Exam Practice Test Part-2 Quiz Course

by

Here you can Take a Free AWS SCWI Exam Practice Test Part 2 Quiz Course with the latest Senior Certified Welding Inspector questions and Answers

1.

Process Control is defined as, “Ensuring all production steps are carried out in accordance with a qualified procedure or work instruction.”

 
 

2.

According to ISO 9000, an annual review of the Quality System is required.

 
 

3.

Once prepared A QMS must not be changed

 
 

4.

The effectiveness of a QA system cannot be verified by periodic audits.

 
 

5.

Effective and adequate training for those personnel performing activities affecting quality is important:

 
 

6.

The Quality Policy is for use by management only.

 
 

7.

QMS systems are dynamic, the basic reason(s) revisions are required include:

 
 
 
 

8.

Access to computer files is controlled by:

 
 
 
 

9.

Methods used to evaluate and select subcontractors include:

 
 
 
 

10.

Most national or international quality standards, such as the ISO 9000 series, require a company to:

 
 
 
 

11.

Using the Special Processes approach, welding is usually controlled by:

 
 
 
 

12.

In a QMS, Inspection and Testing is done in three stages; these are:

 
 
 
 

13.

A Maintenance and Calibration Program is an important part of the QMS. This is the responsibility of the:

 
 
 
 

14.

Product Inspection Results status must be clear and obvious. Categories of status include:

 
 
 
 

15.

Nonconforming material can be handled in several ways; these include:

 
 
 
 

16.

Nonconforming product reports lead to the development of a Corrective Action System to avoid future problems; this Corrective Action System is the responsibility of the:

 
 
 
 

17.

Corrective Action Systems may be developed based on:

 
 
 
 

18.

Steps required for Corrective Action include:

 
 
 
 

19.

A Preventive Action System:

 
 
 
 

20.

A QMS includes procedures for the following:

 
 
 
 

21.

Quality Records should be:

 
 
 
 

22.

A QMS should include which of the following

 
 
 
 

23.

Statistical Techniques can be a valuable system to:

 
 
 
 

24.

System Procedures are a necessary and important aspect of a QMS. Guidelines for writing these include:

 
 
 
 

25.

Poor communication can result in:

 
 
 
 

26.

The ISO document most likely to be used for welded products in a job shop is:

 
 
 
 

27.

A quality manual should be distributed to

 
 
 
 

28.

The design and control of the Quality Manual should include

 
 
 
 

29.

A Quality Policy should be:

 
 
 
 

30.

An effective QMS lists the organizational structure of the company and details the quality responsibilities for each level. External communication is usually the responsibility of the:

 
 
 
 

31.

An important step for all product orders is:

 
 
 
 

32.

In the ISO QMS, design activities are controlled by the:

 
 
 
 

33.

Document Control is an important part of QMS. Documents requiring control include:

 
 
 
 

34.

Match the following items:
A. Quality Records
B. Work Instructions
C. System Procedures
D. Quality Manual
1. Sets out the manner in which an organization addresses each element of the QMS model.
2. Details the manner in which specific activities are carried out
3. Maintains files of all the records supporting the QMS
4. Embodies all the procedures on implementation of QMS elements

 
 
 
 

35.

Quality Manuals should be controlled; however, uncontrolled copies are permitted.

 
 

36.

Hand-written changes, if initialed and dated in ink by an authorized person, are permitted on all controlled documents except for the Quality System Manual.

 
 

37.

The primary purpose of an Audit is to find areas of non-compliance.

 
 

38.

Statistical Process Control is always required as part of the Quality System

 
 

39.

The Quality Assurance Manager has the authority, responsibilities, and organizational freedom to:

 
 
 
 

40.

The Quality Manager shall prepare an Annual Quality System Report based in part on:

 
 
 
 

41.

The Annual Quality System Report shall include:

 
 
 
 

42.

Annual Quality reports often note more employee training is needed. An often-stated argument against providing additional training is:

 
 
 
 

43.

A Management Committee consists, in part, of the General Manager, QA Manager, Chief Engineer, Production Manager, and Purchasing Manager. Their duties include:

 
 
 
 

44.

All repairs and rework must:

 
 
 
 

45.

Corrective Action involves reaction to:

 
 
 
 

46.

Quality Records must be

 
 
 
 

47.

Internal Quality Audits:

 
 
 
 

48.

Personnel Records should include:

 
 
 
 

49.

Subcontractors may be evaluated using which of the following methods:

 
 
 
 

50.

Materials Identification and Traceability are often used in Quality Systems. When required, methods to achieve them include:

 
 
 
 

51.

An Approved Subcontractor List is a valuable tool in a Quality System. Use of such lists audit/survey

 
 
 
 

52.

Production Processes that directly affect quality must be carried out under controlled conditions. Controlled conditions include the following:

 
 
 
 

53.

Inspection and Testing should be done:

 
 
 
 

54.

The responsibility for implementing a calibration and maintenance program for test equipment belongs to the:

 
 
 
 

55.

Inspection, measurement, and test equipment (IM&TE) items should be maintained on a list showing:

 
 
 
 

56.

The current status of materials to be used in a fabrication must be known. If materials do not conform to specifications, they can be handled by:

 
 
 
 

57.

The Contract Review system is the responsibility of:

 
 
 
 

58.

The ISO Quality approach requires documentation on four levels; these are:

 
 
 
 

59.

Contract Reviews are valuable, and must be taken seriously. A proper Contract Review can show:

 
 
 
 

60.

All design changes shall be approved and documented by the:

 
 
 
 

Question 1 of 60

Are you Seeking the free AWS SCWI Exam Practice Test Part-2 quiz course with the latest MCQs (multiple-choice questions) and answers?

Free AWS SCWI Exam Practice Test Part-2 Quiz
Take the Free AWS SCWI Exam Practice Test Part-2 Quiz Course

 

If yes, you are in the right place to prepare for the AWS SCWI Exam with the latest AWS SCWI questions and answers. In the AWS SCWI Exam Practice Test Quiz Course, We are going to take a look at some questions about the “ISO 90001 & ISO 9004-1“. and Quality Assurance. We will also share experiences and topics associated with the AWS SCWI real exam. Stay connected and test your Welding Inspection knowledge with UpWeld Quiz.

Learn more:  Learn Everything You Need to Know About AWS SCWI Exam Practice Questions and Answers.

Note: After completing the quiz course, you can see your test score. You can attempt this quiz course an unlimited number of times free of cost at any time any place. If you want the AWS SCWI Exam questions in PDF format, you can copy all the questions after completing the quiz course, paste them into MS Word, and save them as a PDF (while doing this don’t forget to give credit to upweld.org).

Click here to Take a Free AWS SCWI Exam Practice Test Part 1 Quiz Course

Note: Here, you can take free practice quizzes for the following courses:

If you have any questions, feel free to ask in the comment section below. We’re happy to answer!

Leave a Reply