Take A Free NACE CP 2 Technician Exam Practice Test – Quiz Course

Here you can take the free NACE CP 2 Technician Exam Practice Test with the latest Cathodic Protection Technician (CP 2) Exam Questions and Answers

1.

Q: How much CP current is required to protect a buried steel storage tank that is 3 m diameter by 6 m long and coated (i.e. 4% bare) in 8,500 Ωꞏcm soil based on a design CP current density of 20 mA/m2 of exposed steel surface area?

 
 
 
 

2.

Math – Algebra, Geometry, Logic, Unit Conversions
Q: What is the weight of a steel rod that is 50 mm in diameter by 3 feet long?
Given: 1 inch = 2.54 cm;1 foot = 12 inches, 1 kg = 2.205 lb, 1 cm3 of steel = 8 g

 
 
 
 

3.

Q: Point A on a pipeline is 16 km upstream of Point B. There are no sources of DC current connected to the pipeline between these two points. The line current measured at Point
A is 6.3 A upstream and the line current measured at Point B is 2.4 A downstream. How much CP current is being picked up or discharged along the pipeline between Points A & B?

 
 
 
 

4.

Q: Which of the following are depolarizers?

 
 
 
 

5.

Q: Polarization occurs

 
 
 
 

6.

Q: Which of the following factors affect polarization?

 
 
 
 
 

7.

Q: Which of the following are types of polarization?

 
 
 
 

8.

Q: The measure of the electrochemical difference between two metals in an electrolyte is which of the following?

 
 
 
 

9.

What is the current in a 91 m (300 ft) span of 762 mm (30 in) pipe weighing 176.65 kg/m 118.7 lb/ft), if the voltage drop across that span is 0.62 mV?

 
 
 
 

10.

Q: The relationship between current and polarization is described by which of the following?

 
 
 
 

11.

Q: A passivating material will exhibit which of the following properties?

 
 
 
 
 

12.

When an ammeter with an internal resistance of 0.15 Ω is inserted into a circuit that is normally operating at 5 V and 20 A, what will the ammeter current read?

 
 
 
 

13.

Q: In a standard emf series of metals, which of the following is represented?

 
 
 
 

14.

Stray Current
Q: At which location(s) in Figure 15 is corrosion expected due to stray current?
Figure-15-DC-Powered-Train.png

 
 
 
 

15.

Q: If two different metals are connected together in an electrolyte, the metal with the

 
 
 
 

16.

Q: In a practical galvanic series of metals, which of the following is represented?

 
 
 
 

17.

Q: A corrosion cell can form under which of the following conditions?

 
 
 
 

18.

Q: When bare metal passes under a paved road surface,

 
 
 
 

19.

Q: An environment where cathodic protection is NOT effective is

 
 
 
 

20.

Q: The cathodic protection criteria for steel includes which of the following?

 
 
 
 
 

21.

Q: When cathodic protection is applied to a corroding steel surface, it shifts the corrosion cell potential?

 
 
 
 

22.

Q: Cathodic protection polarizes

 
 
 
 

23.

Q: The current requirement for cathodic protection of a structure will increase with a

 
 
 
 

24.

Q: In a galvanic anode system, the driving voltage is due to the

 
 
 
 

25.

Meter Operation

Figure-14-Typical-DMM.png
Q: Referring to Figure 14, select the correct configuration to measure the 50mA output current of a galvanic anode with a ‘positive’ meter indication.

Referring-to-Figure-14-select-the-correct-configuration-to-measure-50m-A-output-current-of-a-galvani.png

 
 
 
 

26.

Figure-14-Typical-DMM.png

Q: Referring to Figure 14, select the recommended configuration for pipe-to-soil potential measurements to assess protection.

Referring-to-Figure-14-select-the-recommended-configuration-for-pipe-to-soil-potential-measurements.png

 
 
 
 
 

27.

Q: Which is NOT a primary reaction at the anode?

 
 
 
 

28.

Q: Which of the following will decrease cathodic protection current requirements?

 
 
 
 

29.

Q: A galvanic anode system is NOT normally suitable in which of the following conditions?

 
 
 
 

30.

Q: The purpose of the galvanic anode backfill is NOT to

 
 
 
 

31.

Q: The elements of a galvanic cathodic protection system in soil include which of the following?

 
 
 
 
 

32.

Q: An impressed current system is NOT normally practical under which of the following conditions

 
 
 
 

33.

Q: Rectifier components could include which of the following?

 
 
 
 

34.

Q: Which of the following DC power supplies are commonly used to charge batteries that in turn provide cathodic protection current?

 
 
 
 

35.

Q: A transformer will

 
 
 
 

36.

Q: If the primary AC voltage is 100 Volts AC, and there are 100 primary windings with 200 secondary windings, what is the secondary voltage?

 
 
 
 

37.

Shunt Measurements

Figure-13-Shunt-Measurement.png
Q: What is the shunt current magnitude & direction for the measurement shown in Figure 13?
Current Direction

What-is-the-shunt-current-magnitude-amp-direction-for-the-measurement-shown-in-Figure-13.png

 
 
 
 
 

38.

Q: What would the meter in Figure 13 display if the shunt current was 40 A from Right-to-Left?

Figure-13-Shunt-Measurement.png

 
 
 
 

39.

Q: With a single diode installed in series with an AC voltage source the results will be

 
 
 
 

40.

Q: Full wave rectification can be achieved with

 
 
 
 
 

41.

Q: What is the purpose of a “free-wheeling” diode?

 
 
 
 

42.

Q: The advantage of three-phase rectifiers over single-phase rectifiers is that they

 
 
 
 

43.

Q: Which DC power supply converts heat energy directly to electrical energy?

 
 
 
 

44.

Q: A constant potential rectifier provides a constant

 
 
 
 

45.

Q: What is the pipe-to-earth resistance of a 3 km (1.86 mi) section of 32 cm (12.75 in) diameter pipe that has a 4-wire current span at each end with the following data?

Eon TS1 = -1320 mV   Eon TS2 = -1240 mV
Eoff TS1 = -1000 mV Eoff TS2 = -1080 mV
Ion TS1 = 3.0 A Ion TS2 = 2.6 A
Ioff TS1 = 1.0 A Ioff TS2 = 1.0 A

 

 
 
 
 

46.

Q: A structure-to-electrolyte potential measures the potential difference between

 
 
 
 

47.

Q: A close interval potential survey is a test where structure-to-electrolyte potentials are measured

 
 
 
 

48.

Q: Polarized potentials are measured

 
 
 
 

49.

Soil Resistivity

Figure-9-Soil-Resistance-Measurement.png

Q: Assuming the measurement shown in Figure 9 is from a Wenner 4-Pin arrangement with 1.5 m spacing between pins, what is the corresponding soil resistivity?

 
 
 
 
 

50.

Q: Polarization is determined by

 
 
 
 

51.

Q: Assuming the measurement shown in Figure 11 is for the soil box as shown in Figure 12 having a soil cross-sectional area (A) of 12 cm2 and length (L) of 120mm between the red terminals, what is the corresponding soil resistivity?

Figure-11-Soil-Resistance-Measurement-Figure-12-Soil-Box-Measurement.png

 
 
 
 

52.

Q: What is the current in a 91 m (300 ft) span of 762 mm (30 in) pipe weighing 176.65 kg/m (118.7 lb/ft), if the voltage drop across that span is 0.62 mV?

 
 
 
 

53.

Q: Structure-to-electrolyte potentials can be used for which of the following purpose(s)?

 
 
 
 
 

54.

Q: Which of these would clearly indicate that a tank is isolated?

 
 
 
 

55.

Q: For steel in concrete what is the probability of corrosion at a potential of -370mVcse?

 
 
 
 

56.

Q: If current being impressed onto a structure is causing a potential gradient of 50 mv per meter (average_ and the reference electrode is 3 m from the structure, what is the potential being measured if the true potential at the structure is -800 mV?

 
 
 
 

57.

Q: With proper instrumentation, a dual soil coupon can be used to predict which of the following?

 
 
 
 
 

58.

Q: An electrolytic couple between a pipe and a casing

 
 
 
 

59.

Q: With sufficient current applied to a pipeline that has an electrolytic couple to the casing, the potentials will

 
 
 
 

60.

Q: A stray current is a current that

 
 
 
 

61.

Potential Measurements, Criteria, & Isolation

Figure-3-Structure-Polarization-and-Depolarization-due-to-CP-Current.png
Q: In Figure 3, which potential is used to evaluate the -850 mVcse potential criterion?

 
 
 
 

62.

Q: In Figure 3, which potential is used to evaluate 100 mV polarization criteria?

Figure-3-Structure-Polarization-and-Depolarization-due-to-CP-Current.png

 
 
 
 

63.

Q: Which measured potential below is most likely for new unprotected steel in moist soil?

 
 
 
 

64.

Figure-4-Cased-Crossing.png

Q: Referring to the cased crossing in Figure 4, if the IR-free polarized potentials of the Pipe & Casing are as shown, which of the following conditions most likely exists?

Referring-to-the-cased-crossing-in-Figure-4-if-the-IR-free-polarized-potentials-of-the-Pipe-amp-Casin.png

 
 
 
 

65.

Figure-5-Isolating-Flange.png

Q: Referring to Figure 5, if the indicated potentials are measured while the CP system is on, which of the following conditions is confirmed?

Referring-to-Figure-5-if-the-indicated-potentials-are-measured-while-the-CP-system-is-on-which-of.png

 
 
 
 

66.

Q: Referring to the TR panel in Figure 7, what is the DMM in Figure 6 most likely measuring?

Figure-6-DMM-Measurement-Figure-6-DMM-Measurement.png

 
 
 
 

67.

Figure-7-Typical-TR-Front-Panel.png

Q: Referring to the TR panel in Figure 7, which most accurately describes component IDs?

Referring-to-TR-panel-in-Figure-7-which-most-accurately-describes-component-IDs.png

 
 
 
 
 

68.

Q: Referring to Figure 8, which value will DMM display when connected as shown?

Figure-8-TR-Measurement.png

 
 
 
 

69.

Q: A mitigation control bond should be designed to

 
 
 
 
 

70.

Q: A mitigation bond may cause more problems under which of the following conditions?

 
 
 
 
 

71.

Q: AC voltages on pipelines do NOT result from

 
 
 
 

72.

Q: On a cathodically protected pipeline, AC corrosion can be expected at which current densities?

 
 
 
 
 

73.

Q: The AC voltage-to-ground on a section of pipeline paralleling AND crossing a power line tends to be the highest

 
 
 
 
 

74.

Q: Methods of lowering hazardous AC voltages include installing which of the following?

 
 
 
 
 

75.

Q: A polarization cell is used to

 
 
 
 

76.

Q: Tests for interference can be indicated by which of the following?

 
 
 
 
 

77.

Q: When an AC voltage of 13 V is measured on a pipeline, what course of action should be taken?

 
 
 
 
 

78.

Q: The purpose of a gradient mat is to

 
 
 
 

79.

Reference Electrode Conversions

Given: Potential of Zinc Reference (ZRE) = -1116 mVCSE

Potential of Silver Chloride Reference (SSC) = -60 mVCSE

Q: If a polarized pipe potential of +240 mV was measured using ZRE, what would the measured potential be if a CSE was used?

 
 
 
 

80.

Q: If a sheet pile potential of -1.2 V was measured using SSC, what would the measured potential be if ZRE was used?

 
 
 
 

81.

Q: The corrosion rate of iron caused by current discharge is

 
 
 
 

82.

Q: Which of the following is NOT a source of dynamic stray current?

 
 
 
 

83.

Q: Stray current CAN NOT be detected by

 
 
 
 

84.

Q: Cathodic interference occurs

 
 
 
 

85.

Q: An electronegative peak in potentials along a cathodically protected pipeline may be indicative of

 
 
 
 

86.

Q: Analysis of dynamic stray current does NOT typically include the evaluation of

 
 
 
 

87.

Q: With the current (and direction) measured at adjacent spans on a pipeline, which condition indicates a current discharge (Location A is left of Location B

 
 
 
 

88.

Q: Recommended methods of mitigating cathodic interference from another cathodic protection system include which of the following?

 
 
 
 
 

89.

Q: A complete cathodic protection system monitoring program consists of which of the following?

 
 
 
 

90.

Q: Proper operation of a rectifier can be confirmed by which of the following?

 
 
 
 
 

91.

The Corrosion Cell

Figure-2-Typical-Corrosion-Cell.png
Q: In the corrosion cell shown in Figure 2, which of the following occurs at the cathode?
Given:
1. Oxidation
2. Current pick-up
3. Metal loss
4. No metal loss
5. Current Discharge
6. Reduction

 
 
 
 
 

92.

Q: In the corrosion cell shown in Figure 2, what is the direction of ICORR?

Figure-2-Typical-Corrosion-Cell.png

 
 
 
 

93.

Q: In the corrosion cell shown in Figure 2, which of the following conditions would reduce ICORR?

Figure-2-Typical-Corrosion-Cell.png

 
 
 
 

94.

Q: A short to the bare structure will most likely cause which of the following?

 
 
 
 

95.

Q: Which of the following regulations require inspection of an interference control drainage bond?

 
 
 
 
 

96.

Q: Reasons for keeping records include which of the following?

 
 
 
 
 

97.

Q: Which of the following items must be included in recording structure-to-electrolyte potentials on routine surveys?

 
 
 
 
 

98.

Q: Which of the following is NOT necessary for establishing the integrity of an aging pipeline?

 
 
 
 

99.

Q: A job safety analysis allows a project to proceed when the

 
 
 
 
 

100.

Q: Which of the following is the maximum current passing through an average-sized body that will allow the muscles to let it go?

 
 
 
 

101.

Q: It is safe to work behind the panel of a rectifier under which of the following conditions?

 
 
 
 

102.

Q: A constant AC voltage-to-ground equal to or in excess of which of the following is considered to be hazardous?

 
 
 
 
 

103.

Q: When measuring a structure-to-electrolyte potential, which of the following measurements should be taken first for safety?

 
 
 
 

104.

DC Electrical Circuits
Figure-1-Series-Parallel-Circuit.png
Q: What is the total Resistance in the circuit depicted in Figure 1?

 
 
 
 

105.

Q: What value of E1 would double the current in R2?

 
 
 
 

106.

Q: Hazardous materials include which of the following?

 
 
 
 
 

107.

Q: Gases that either promote combustion or are flammable can be produced at the

 
 
 
 

108.

Q: Before working on a project you must know which of the following?

 
 
 
 
 

109.

Q: Personal protective equipment in plants includes which of the following?

 
 
 
 
 

Question 1 of 109

Are You Looking for a Free NACE CP 2 Technician Exam Practice Test?

Free NACE CP 2 Technician Exam Practice Test
Take A Free NACE CP 2 Technician Exam Practice Test – Quiz Course

 

Free NACE CP 2 Technician Exam Practice Test 2026 – Questions and Answers

Are you preparing for the NACE CP 2 Technician Exam and looking for a free online practice test with Cathodic Protection Technician Level 2 questions and answers?

Welcome to UpWeld, where you can take a free NACE CP 2 Technician Exam Practice Test to assess your knowledge, improve your technical understanding, and prepare for the AMPP Cathodic Protection Technician (CP2) certification examination.

Our online practice quiz covers important topics such as corrosion theory, cathodic protection systems, electrical measurements, field testing, rectifier troubleshooting, stray current interference, and corrosion control.

Whether you are an experienced cathodic protection technician, CP1-certified professional, corrosion inspector, or engineering professional preparing for the next certification level, this free practice test can help you identify knowledge gaps and strengthen your exam preparation.

Start the Free NACE CP 2 Technician Practice Test below and test your knowledge today!

What Is the NACE CP 2 Technician Certification?

The NACE CP 2 Technician Certification, now administered by the Association for Materials Protection and Performance (AMPP), is an intermediate-level professional certification for individuals involved in cathodic protection testing, maintenance, troubleshooting, and system evaluation.

Cathodic protection is an electrochemical corrosion control method used to protect metallic structures from deterioration in soil, water, and other electrolytes.

The CP2 certification demonstrates knowledge and practical skills associated with evaluating and maintaining cathodic protection systems.

CP2 technicians commonly work with:

  • Underground oil and gas pipelines

  • Buried steel storage tanks

  • Marine and offshore structures

  • Water distribution pipelines

  • Industrial facilities and underground infrastructure

  • Impressed current and galvanic cathodic protection systems

The certification emphasizes practical field measurements, accurate data interpretation, electrical knowledge, and troubleshooting techniques.

Free NACE CP 2 Technician Exam Practice Test – Online Quiz

Our free NACE CP2 Practice Test is designed to support candidates preparing for the AMPP Cathodic Protection Technician Theory Examination.

The practice questions are intended to help you review the technical principles and calculations commonly associated with intermediate-level cathodic protection work.

What You Can Learn from This Free Practice Test

  • Fundamental and intermediate corrosion theory

  • Electrochemical reactions and polarization

  • Galvanic and impressed current cathodic protection systems

  • Structure-to-electrolyte potential measurements

  • Electrical circuits, Ohm’s law, and resistance calculations

  • Rectifier operations and troubleshooting

  • Soil resistivity and current requirement calculations

  • Stray current interference and mitigation techniques

  • Field testing procedures and survey techniques

  • Equipment operation, maintenance, and electrical safety

The test includes multiple-choice questions covering both theoretical knowledge and practical applications.

The purpose of this quiz is to improve understanding, not simply memorize answers.

How to Take the Free NACE CP 2 Technician Practice Test

Follow these simple steps:

  1. Read each multiple-choice question carefully.

  2. Review all the answer options before selecting your response.

  3. Use your understanding of cathodic protection principles and field practices.

  4. Complete the available questions in the online quiz.

  5. Review the correct answers using the quiz answer key.

  6. Identify your weaker topics and revise them before attempting the test again.

For additional exam preparation, practice calculations without depending entirely on notes or reference materials.

Practice Test: Free online quiz

Exam Level: Intermediate

Subject: Cathodic Protection Technician CP2

Question Format: Multiple-choice questions

Purpose: Self-assessment, technical revision, and certification preparation

AMPP NACE CP 2 Technician Exam Pattern 2026

Candidates preparing for the official certification examination should understand the current examination structure.

According to the AMPP CP2 Theory Exam Preparation Guide published in November 2025, the examination format was updated effective December 16, 2025.

Exam Details Current Information
Certification Cathodic Protection Technician (CP2)
Certification Authority AMPP
Common Former Name NACE CP 2 Technician
Theory Exam Code NACE-CP2-001
Examination Format Computer-Based Testing (CBT)
Total Questions 110
Scored Questions 89
Unscored Questions 21
Theory Exam Duration 3 Hours
Question Type Multiple Choice
Practical Examination Separate hands-on assessment
Certification Validity 3 Years

The unscored questions are used for evaluating potential future examination content.

The official theory examination is closed-book. However, reference materials are provided electronically for questions requiring equations, conversion charts, or other specified references.

Candidates receive pass/fail results, and official assessment and certification decisions are made by AMPP.

Important: The official examination format may change. Always refer to AMPP for the latest examination requirements.

NACE CP 2 Technician Exam Syllabus and Important Topics

The AMPP CP2 examination evaluates several important knowledge and skill areas. The following subjects are particularly useful when preparing for the theory examination and reviewing practical field applications.

1. Corrosion Theory and Electrochemistry

Corrosion theory is the foundation of cathodic protection.

Important topics include:

  • Electrochemical corrosion cells

  • Anodic and cathodic reactions

  • Oxidation and reduction

  • Electrochemical potential measurements

  • Nernst equation

  • Faraday’s law

  • Activation and concentration polarization

  • Passive and active corrosion behaviour

  • Factors affecting corrosion rates

Candidates should understand how electrochemical reactions cause corrosion and how cathodic protection reduces metal loss.

2. Cathodic Protection Systems

Candidates should understand the design principles and operating characteristics of different cathodic protection systems.

Important areas include:

  • Galvanic anode cathodic protection

  • Impressed current cathodic protection (ICCP)

  • Sacrificial anode materials

  • CP current distribution

  • Anode beds and backfill

  • Electrical continuity and isolation

  • Coating defects and current requirements

  • CP system performance evaluation

Understanding the differences between galvanic and impressed current systems is essential for selecting and evaluating corrosion control methods.

3. Electrical Fundamentals and Measurements

Electrical knowledge is important for CP system testing and troubleshooting.

Topics include:

  • Ohm’s law

  • Voltage, current, and resistance

  • Series and parallel circuits

  • Power calculations

  • Digital multimeter operation

  • Ammeter and shunt measurements

  • Current direction and polarity

  • Transformer and rectifier fundamentals

Candidates should be comfortable performing mathematical calculations and interpreting electrical readings.

4. Cathodic Protection Field Measurements

Field testing is a major part of CP2 technician responsibilities.

Important techniques include:

  • Structure-to-electrolyte potential measurements

  • ON and instant-OFF potential measurements

  • Reference electrode operation

  • Soil resistivity testing

  • Wenner four-pin method

  • Current requirement testing

  • Current span measurements

  • Close Interval Potential Surveys (CIPS)

  • Direct Current Voltage Gradient (DCVG) surveys

  • Alternating Current Voltage Gradient (ACVG) surveys

  • Pipeline casing and isolation testing

Understanding the purpose, limitations, and correct interpretation of different measurements is essential.

5. Rectifier Operation and Troubleshooting

The CP2 examination also addresses the operation and maintenance of impressed current cathodic protection equipment.

Study areas include:

  • Transformer-rectifier components

  • AC-to-DC conversion

  • Diodes and bridge rectifiers

  • Rectifier output measurements

  • Rectifier efficiency

  • Electrical troubleshooting

  • Equipment inspection

  • Safe operating procedures

Candidates should understand common equipment faults and the safe methods used to investigate them.

6. Stray Current Interference

Stray current can cause corrosion damage when electrical current leaves a metallic structure and enters an electrolyte.

Important topics include:

  • Static and dynamic stray current

  • AC and DC interference

  • Current pickup and discharge

  • Interference testing

  • Mitigation bonds

  • AC interference hazards

  • Interference control techniques

7. Data Interpretation, Documentation, and Safety

Cathodic protection technicians are responsible for accurate field records and safe equipment operation.

Preparation should include:

  • Field data collection

  • Interpretation of measurement results

  • Inspection reports

  • Equipment calibration and maintenance records

  • Field documentation

  • Job safety analysis

  • Electrical hazard awareness

  • Safe testing procedures

  • Applicable corrosion control standards

NACE CP 2 Technician Certification Eligibility Requirements

AMPP provides different pathways for candidates to meet the education and experience requirements for CP2 certification.

Applicants generally need to qualify through one of the following routes:

Option 1: Work Experience

  • Three years of verifiable cathodic protection work experience.

Option 2: Technical Education and Experience

  • Two years of verifiable cathodic protection work experience.

  • Two years of approved post-high-school technical, science, mathematics, or trade education.

Option 3: Engineering or Science Degree

  • One year of verifiable cathodic protection work experience.

  • A four-year degree in engineering or physical science.

Candidates must also satisfy the applicable training, ethics, examination, and certification application requirements.

AMPP recommends CP1-level knowledge before taking the CP2 course. Its examination preparation guide also identifies CP1 or equivalent training as a prerequisite. Applicants should confirm the current certification requirements directly with AMPP.

Completing a training course or online practice test does not automatically award professional certification.

How to Prepare for the NACE CP2 Technician Exam

A good preparation strategy combines technical study, practical experience, and repeated self-assessment.

Understand the CP2 Body of Knowledge

Review the official AMPP examination preparation guide and identify the major technical subjects you need to study.

Practice Electrical and Corrosion Calculations

Focus on important formulas involving electrical resistance, current, voltage, soil resistivity, current density, and corrosion rates.

Improve Your Field Measurement Knowledge

Review the correct use of reference electrodes, multimeters, current interrupters, shunts, and survey equipment.

Study Practical Troubleshooting

Understand how to investigate rectifier faults, electrical isolation problems, abnormal potential readings, and interference conditions.

Take Free CP2 Practice Tests

Attempt the UpWeld NACE CP 2 Technician Practice Test and review your incorrect answers.

Review and Repeat

Repeat the questions after studying your weaker topics. Focus on understanding the reasons behind the correct answers.

Example NACE CP 2 Technician Questions and Answers

Here are three additional examples to help you understand the type of technical knowledge useful for CP2 preparation.

Question 1: What is the primary purpose of cathodic protection?

A. To increase metal oxidation

B. To reduce corrosion by making the protected metal act as a cathode

C. To increase electrolyte resistivity in every situation

D. To remove all electrical current from a structure

Correct Answer: B

Explanation: Cathodic protection reduces corrosion by supplying protective current and shifting the potential of the metallic structure in the cathodic direction.

Question 2: What is the primary purpose of an instant-OFF potential measurement?

A. To measure soil pH

B. To determine the total resistance of a pipeline

C. To minimize the influence of electrolyte IR drop in potential measurements

D. To measure rectifier AC input voltage

Correct Answer: C

Explanation: A properly timed instant-OFF measurement helps reduce the effect of voltage drop through the electrolyte caused by interrupted CP current. Proper interruption and measurement techniques are essential.

Question 3: A current shunt is rated for 100 A at 50 mV. If the measured voltage drop is 25 mV, what is the current?

A. 25 A

B. 50 A

C. 75 A

D. 100 A

Correct Answer: B

Explanation:

Current = (25 mV ÷ 50 mV) × 100 A

Current = 50 A

These are educational practice examples, not questions obtained from an official certification examination.

Buy NACE CP 2 Technician Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS, 1 QUESTION COMES ON THE EXAM
WE HAVE THE LATEST NACE CP 2 Technician – Cathodic Protection Theory QUESTION BANK
Total 500+ questions in the question bank, from theory to practical to numericals.
Cost: $25.00 USD
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact us on WhatsApp: https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank.
Get PDF Format Instantly:
Printable—Instant download.

Benefits of Taking the Free CP2 Practice Test on UpWeld

Practicing with multiple-choice questions can help improve exam preparation by:

  • Building confidence with technical terminology

  • Strengthening knowledge of corrosion control

  • Improving calculation skills

  • Developing familiarity with multiple-choice questions

  • Identifying areas requiring additional study

  • Reinforcing practical field-testing principles

  • Supporting independent learning and revision

The test can be used alongside official AMPP study materials, practical training, and workplace experience.

Start Your Free NACE CP 2 Technician Exam Practice Test Today

Are you ready to test your cathodic protection knowledge?

Take the Free NACE CP 2 Technician Exam Practice Test on UpWeld and strengthen your understanding of corrosion theory, electrical measurements, CP systems, field-testing techniques, and troubleshooting.

Use the quiz to evaluate your knowledge and identify technical topics that require further study.

Take the Free NACE CP 2 Technician Practice Test Now!

AMPP NACE CP2 Technician Exam Quiz

AMPP NACE CP3 Technologist Exam Quiz

AMPP NACE CP4 Exam Quiz

You can also improve your foundational knowledge with our Free NACE CP 1 Tester Exam Practice Test.

Disclaimer: This website provides independent educational practice materials. UpWeld is not affiliated with, sponsored by, or endorsed by AMPP. The questions are intended for exam preparation and do not represent official or confidential examination questions. No practice test can guarantee certification success.

Frequently Asked Questions About the NACE CP 2 Technician Exam
Is the NACE CP 2 Technician Practice Test free?

Yes. UpWeld provides this online NACE CP 2 Technician practice quiz free of charge for educational and self-assessment purposes.

Is NACE CP 2 the same as AMPP CP2?

The certification is commonly called NACE CP2 because it originated under the former NACE certification program. It is now administered by AMPP under the Cathodic Protection Technician (CP2) designation.

How many questions are on the official AMPP CP2 exam?

The current CP2 Theory Examination includes 110 multiple-choice questions, consisting of 89 scored questions and 21 unscored questions, according to the November 2025 examination preparation guide.

How long is the AMPP CP2 Theory Examination?

The official theory exam duration is three hours, effective December 16, 2025.

Does CP2 certification include a practical exam?

Yes. CP2 certification includes both a theory examination and a separate practical assessment of cathodic protection skills.

Can I prepare for the CP2 exam through online practice questions?

Online practice questions are useful for reviewing technical concepts, calculations, and terminology. However, candidates should also study official AMPP learning materials and develop practical field-testing competence.

Do I need field experience for CP2 certification?

Yes. AMPP has specific experience and education requirements. Candidates must satisfy an approved eligibility pathway and all additional certification requirements.

Is the UpWeld practice test an official AMPP examination?

No. The UpWeld practice test is an independent educational resource and is not an official AMPP certification examination.

How often should I practice CP2 questions?

Practice regularly throughout your preparation. Review incorrect answers, strengthen weaker subjects, and revisit questions to check whether your understanding has improved.

1 thought on “Take A Free NACE CP 2 Technician Exam Practice Test – Quiz Course”

Comments are closed.