Take a Free Welding Symbols Practice Test – Increase Your Knowledge

Here You can Take A Free Welding Symbols Practice Test, With the Latest Welding Symbols Questions and Answers

1.

What does the arc above the welding below signify?

 a. Flare-bevel groove weld reinforced by a fillet weld

 b. Concave contour finish

 c. Convex contour finish

 c. Convex contour finish

2.

What type of joint configuration does the following symbol show?

 A. Square Groove

 B.Scarf

 C. Skewed Groove

 D. Sloped Groove

3.

Which one of the following symbols above indicates an intermittent fillet weld?

 A. 5

 B. 1

 C. 8

 D. 6

4.

Which one of the following symbols above indicates an intermittent fillet weld?

 A. 5

 B. 4

 C. 6

 D. 8

5.

Name the symbol above which represents a groove weld with melt-through?

 A. 7

 B. 3

 C. 2

 D. 6

6.

Which symbol above represents a plug weld not completely filled?

 A. 9

 B. 1

  C. 7

 D. 3

7.

Name the symbol above which does represent a groove weld with backing weld or back weld?

 A. 9

 B. 1

 B. 9

 C. 6

8.

Point out the welding symbol given below which shows the use of what type of completed weld?

 A. Single bevel-groove weld with back weld

 B. Single v-groove weld with back weld

 C. Single bevel-groove weld with backing weld

 D. Single v-groove weld with backing weld

9.

What does the supplementary symbol shown on the other side location represent, in the welding symbol given below?

 A. Melt-through of the weld from another side

 B. Back weld

 C. Backing weld

 D. Option B and C

10.

What type of weld symbol is described below?

 A. Segmented Fillet Weld

 B. Intermittent Fillet Weld

 C. Chain Intermittent Fillet Weld

 D. Staggered Intermittent Fillet Weld

11.

The 3/4 dimension refers to what is in the welding symbol given below.

 Root Opening

 Effective Throat

 Weld Size

 Depth of Bevel

12.

What type of weld does the welding symbol below describe, if applied to a 1-inch thick weld joint?

 

 A. Partial penetration double bevel-groove weld

 B. Full penetration double bevel-groove weld

 C. Partial penetration double v-groove weld

 D. Full penetration double v-groove weld

13.

What does the 1/8 dimension refer to in the welding symbol given below?

 A. Depth of Preparation

 B. Root Face

 C. Groove Angle

 D. Root Opening

14.

What type of joint is depicted in the symbol given below?

 A. Flare v-groove

 B. Edge flange

 C. Flare bevel groove

 D. Corner flange

15.

Which of the symbols below describe the weld shown in the given figure?

 A

 B

 C

 D

16.

The following welding symbol specifies what?

 a. A field weld

 b. An all-the-way around the weld

 c. A roundabout weld

 d. A staggered intermittent weld

17.

The tail of a welding symbol can be used for:

 a. Specifying the welding process

 b. Referencing an additional drawing

 c. Specifying a welding procedure specification to be used

 d. All of the above

18.

What size weld is required based on the welding symbol below?

 a. Any size is acceptable

 b. Not specified, cannot be determined from the welding symbol

 c. Defaults to the welding code being used

 d. None of the above

19.

A welding symbol must consist of at least:

 a. A reference line

 b. An arrow

 c. An arrow and reference line

 d. An arrow, a reference line, and a weld symbol

20.

What does the symbol below indicate?

 a. The weld requires inspection

 b. The weld must be done in the field

  c. The weld can be done on either side of the joint

  d. The weld is optional

21.

What type of weld does the symbol below correspond to?

 a. Flare-bevel groove weld

 b. Flare-V groove weld

 c. Bevel-groove weld

 d. Square groove weld with concave finish

22.

What type of weld does the symbol below correspond to?

 a. Flare-bevel groove weld

 b. J-groove weld

 c. U-groove weld

 d. Need to see Detail B (Det. B) determine weld type

23.

What type of weld does the symbol below correspond to?

 a. Plug weld

 b. Slot weld

 c. Spot weld

 d. Seam Weld

24.

What type of weld does the symbol below correspond to?

 a. Plug weld

 b. Slot weld

 c. Spot weld

 d. Seam weld

25.

What type of weld does the symbol below correspond to?

 a. Plug weld

 b. Slot weld

 c. Mig weld

  d. Seam Weld

26.

What is the broken arrow shown on the following welding symbol used for?

 a. To indicate the part must be beveled

 b. To indicate which of the members being joined must be beveled

 c. To indicated that either member may be beveled

 d. The broken arrow has no significance

27.

What does the 1/8 value in the symbol below tell us about the joint to be welded?

 a. The root face

 b. The root opening

 c. The depth of bevel preparation

 d. The required penetration

28.

What is the meaning of the black semi-circle above the reference line?

 a. Backing weld

 b. Back weld

 c. Burn-through

 d. Melt-through

29.

What type of weld is being called for by the welding symbol below?

 a. Fillet weld

 b. Double-sided fillet weld

 c. Intermittent fillet welds

 d. Staggered intermittent fillet welds

30.

What does the “5” indicate in the welding symbol from Question 15?

 a. The length of the weld

 b. The number of welds

 c. The size

 d. The pitch

31.

Multiple reference lines indicate that more than one weld must be made. Which weld must be made first?

  a. Fillet weld arrow side

 b. Fillet weld another side

  c. Bevel-groove weld

 d. Square groove weld

32.

What type of weld does the symbol below correspond to?

 a. Plug weld

 b. Stud weld

 c. Spot weld

 d. Resistance weld

33.

Which of the following statements best describes what the welding symbol is calling for?

 a. Filed weld inspection

 b. Weld inspection all the way around the joint

 c. Visual inspection all the way around the joint

 d. Vickers hardness testing all the way around the joint

34.

What does the “G” in the welding symbol below indicate?

 

 a. The finish contour

 b. The finish method

 c. General requirements

 d. The FCAW process requires gas shielding

35.

Which statement best describes the requirements of the welding symbol below?

 a. 35-degree bevel-groove weld preparing the vertical member, 1/8 root opening having a depth of bevel preparation of 1/2 and weld size of 5/8 reinforced by a ¾ fillet weld finished convex by grinding.

 b. 35-degree bevel-groove weld preparing the horizontal member, 1/8 root opening having a depth of bevel preparation of 1/2 and weld size of 5/8 reinforced by a ¾ fillet weld finished convex by grinding.

 c. 35-degree bevel-groove weld preparing the vertical member, 1/8 root opening having a depth of bevel preparation of 5/8 and weld size of 1/2 reinforced by a ¾ fillet weld finished convex by grinding.

 d. 35-degree bevel-groove weld preparing the vertical member, 1/8 root opening having a depth of bevel preparation of 1/2 and weld size of 5/8 reinforced by a ¾ fillet weld finished concave by grinding.

 Loading …

Question 1 of 35

Are You Looking for Free Welding Symbols Practice Test?

Are you studying for the CWI or CWS exam? Do you deal with welding symbols? Are you well versed in this universal language? Then take this Beginner level Welding Symbols Practice Test and see how you well you can do.

If your answer is yes then you are at the right website. Here You Can Take a Free Online Welding Symbols Practice Test and Improve Your Welding Symbols Exam Score. Here You Can Learn everything you need to know about Welding Symbol quick and easily.

Welding symbols are used to communicate vital information about welding requirements. Many different people across the industry must be able to write and interpret welding symbols. Unfortunately, even in manufacturing facilities where welding is the primary industrial process there is a lack of understanding about welding symbols.

After Compelete the last Question you will see the Welding Symbols Practice Test Answer Key, No cheating now! Once you complete the test and check your answers please leave us your score and any comments in the comments section below

We will help you to pass the Welding Symbols Practice Exam in the first attempt —99% Guaranteed. Our expert-written Welding Symbols practice material covers the actual exam topics with fully explained answers.

Take unlimited free Welding Symbols Quiz Course tests of any length. We have free new questions updated every week and you can study our material along with any other study materials.

If You Want to Buy Latest AWS CWI Exam Self Study Material, Please Feel Free to contact us.

Buy Welding Symbols Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST AWS (Certified Welding Inspector) CWI Exam QUESTION BANK
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank.
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

Click here to Take free AWS CWI Practice Test

If you want to get AWS CWI Training and Certification, Please feel free to contact us.