Take A Free NDT Level 3 Exam Practice Test – Quiz Course

1.

Materials & Processed
The difference between die casting and permanent mold casting is that:

 
 
 
 

2.

Which of the processes listed below is used the most frequently to bond honeycomb cores to the outer sheets?

 
 
 
 

3.

Corrosion attacks metals by

 
 
 
 

4.

In the making of seamless or electric resistance welded (ERW) pipe or tubing. The most
common discontinuities are oriented

 
 
 
 

5.

Which of the following is true regarding the investment or lost wax casting process?

 
 
 
 

6.

Carbon steel is:

 
 
 
 

7.

When inspecting complex solder joints, the normal NDT method used is:

 
 
 
 

8.

Electrical discharge machining is useful in NDT testing because it can produce:

 
 
 
 

9.

Which of the following alloy would have a negative effect on the corrosion resistance of steel:

 
 
 
 

10.

In the international system of units, the distinction between upper- and lower-case letters should be observed. For example, the meanings of the prefix m (Milli) and M (Mega) differ by:

 
 
 
 

11.

Which of the following materials has the highest electrical conductivity?

 
 
 
 

12.

A process that joins two members together by using capillary action to flow the filler material
is called:

 
 
 
 

13.

Which of the following properties of aluminum alloys is most affected by the presence of geometric stress risers?

 
 
 
 

14.

The highest quality steel is made in which of the following types of furnaces

 
 
 
 

15.

Coating one metal with another metal for the purpose of protecting against corrosion attacks is known as

 
 
 
 

16.

The electrical discharge machining EDM process is used in the NDT field mainly to produce

 
 
 
 

17.

Through what mechanism does heat treating when property performed, remove work-hardened properties:

 
 
 
 

18.

Soldering is a process using a filler metal with a melting point

 
 
 
 

19.

All of the following materials can be joined to carbon steel by welding or brazing except

 
 
 
 

20.

An ultrasonic technique that uses one transducer to send a signal and a second transducer
to receive signals from the same side of the object is called:

 
 
 
 

21.

In the forging process, an excess metal that must be removed by the secondary operation is called:

 
 
 
 

22.

A surface condition produced during casting of an ingot, caused by hot molten splashing on the mold surface is called a:

 
 
 
 

23.

A technical specialty that predicts material behavior based upon the size and location of discontinuities, material properties, and stress distribution is known as:

 
 
 
 

24.

ASNT TC-1A & CP 189
The recommended training course outlines for NDT Level I, II and may be found in:

 
 
 
 

25.

In accordance with CP-189, technicians who attend a 40 Hour NDT training course will receive credit for the training if they:

 
 
 
 

26.

In accordance with SNT-TC-1A, qualification is defined as indicating that a person has:

 
 
 
 

27.

Per CP-189, when an individual with an ASNT Level III certificate terminates their employment to accept a position with another company their employer-issued certification:

 
 
 
 

28.

for an individual with a Bachelor of Science degree. What is the minimum number of months experience as a Level II are needed to qualify for Level III certification?

 
 
 
 

29.

In accordance with SNT-TC-1A, what minimum level of personnel may be qualified to properly perform specific evaluations for acceptance or rejection determination according to written instruction:

 
 
 
 

30.

There is a total of ……. Level of qualification per CP-189:

 
 
 
 

31.

The qualification level in CP-189 which does not exist SNT-TC-1A:

 
 
 
 

32.

In accordance with SNT-TC-1A an individual may be recertified to the former level of certification after the termination of employment and upon employment with a new employer without additional training provided the individual:

 
 
 
 

33.

When the ASNT Level III certificate has expired and a CP-189 certificate had been issued based on this, the employer-based certificate:

 
 
 
 

34.

Per SNT-TC-1A, time of flight diffraction and phased array certification requires:

 
 
 
 

35.

According to ASNT-TC-1A, NDT personnel may be re-examined and have their certificates or revoked at what interval:

 
 
 
 

36.

A certified RT Level I worked 20% of each month performing RT and the remaining 80% in other NDT methods per SNT-TC-1A, what experience is required to achieve RT Level II Certification:

 
 
 
 

37.

In accordance with CP-189, an individual’s certification in a method shall be suspended by the employer if the individual has not performed the duties in that method during a consecutive twelve (12) month period. In SNT-TC-1A, the suspension is:

 
 
 
 

38.

In evaluating qualifications in accordance with SNT-TC-1A, you find that an individual has limited familiarity with the method in which certification is sought. What action should you take?

 
 
 
 

39.

In accordance with SNT-TC-1A, a college graduate with a 4-year degree in business administration would need how many months of NDT Level II experience to become an NDT Level III?

 
 
 
 

40.

The topical outline found in CP-105

 
 
 
 

41.

CP-189 contains the definition of an NDT instructor according to ASNT-TC-1A the NDT instructor is:

 
 
 
 

42.

An outside agency Level III has developed an employer’s written practice and written examination. the company’s quality assurance manager administered one of these exams to a Level II candidate. The company’s NDT foreman graded the exam using the answer key prepared by a Level III consultant. According to SNT-TC-1A, which person cannot certify the technician?

 
 
 
 

43.

In accordance with the recommendation of SNT-TC-1A, it is desirable that the NDT Level III have general familiarity with:

 
 
 
 

44.

In accordance with CP-189, a candidate must be able to read with corrected or natural vision in at least one eye the:

 
 
 
 

45.

In order to assure that personnel being trained for a specific method are understanding the information presented, the best way an instructor could verify this is:

 
 
 
 

46.

In accordance with CP-189, when a candidate for Level I or Level II candidate is working in two methods of NDT, what minimum experience requirements must be met:

 
 
 
 

47.

SNT-TC-1A recommends that the NDT Level III candidate should meet which of the following minimum requirements:

 
 
 
 

48.

CP-189 requires that the NDT instructor

 
 
 
 

49.

Methods
Iridium 192 emits 600 mR/hr. per curie at 1 Meter, what is the radiation intensity at 100 Meter from a 10 Curie source of Iridium 192?

 
 
 
 

50.

Which of the following is a normal film loading sequence for double loading a film cassette for radiography using Iridium 192?

 
 
 
 

51.

Using X-rays, 1.0” aluminum is most likely radio graphically equivalent to approximately what thickness of steel:

 
 
 
 

52.

If the radiation intensity 25 feet from Iridium 192 radiation source is 200 mR/hr, what intensity would it be at 150 feet from the source of radiation?

 
 
 
 

53.

A radiographic technician inspecting parts using gamma radiation below 12 MeV should take the following precautions after the parts are radiographed:

 
 
 
 

54.

A common precaution used for avoiding static marks on radiographic film is to:

 
 
 
 

55.

A portable device that supplies a high intensity of the longitudinally directed magnetic flux between poles is the:

 
 
 
 

56.

Which MT Technique would provide the best sensitivity for detection of discontinuities laying below the surface:

 
 
 
 

57.

The current required for circular magnetization of a carbon steel pipe is proportional to the:

 
 
 
 

58.

The best choice for detecting shrinkage cracks in a radius of magnesium casting with a rough surface would be

 
 
 
 

59.

As the viscosity of a liquid penetrant increase, capillary action:

 
 
 
 

60.

What is the proper environment for interpreting the result of the fluorescent penetrant test?

 
 
 
 

61.

Which penetrant testing technique allows the use of a pre-rinse operation to remove excess penetrant:

 
 
 
 

62.

Which of the following contains a U-shaped frame supporting a hardened steel anvil?

 
 
 
 

63.

Which of the following contains a U-shaped frame supporting a hardened steel anvil?

 
 
 
 

64.

A fiber optic borescope relies on which of the following physical to work:

 
 
 
 

65.

What inspection instrument should be used to measure a dimensional rather than an absolute dimension?

 
 
 
 

66.

The velocity of sound in steel:

 
 
 
 

67.

Which of the following is a limitation of ultrasonic digital thickness gauges?

 
 
 
 

68.

The resolution of an ultrasonic system refers to its ability to:

 
 
 
 

69.

A helium mass spectrometer leak detector is used:

 
 
 
 

70.

Success in electromagnetic testing depends on the proper use of:

 
 
 
 

71.

Heat energy may be transferred from one point to another by convection or radiation.
What drives the energy transfer in all cases?

 
 
 
 

72.

Acoustic emission testing makes use of the Kaiser effect. This phenomenon is best explained as:

 
 
 
 

Question 1 of 72

Are You Looking for Free NDT Level 3 Exam Practice Test?

Take A Free NDT Level 3 Exam Practice Test
Take A Free NDT Level 3 Exam Practice Test

If your answer is yes then you are at the right website. Here You Can Take a Free Online NDT Level 3 Exam Practice Test and Improve Your NDT Lavel III Exam Score. Here You Can Learn everything you need to know about NDT Level 3 Exam

We will help you to pass the NDT Level III Certification Exam in the first attempt —99% Guaranteed. Our expert-written NDT practice material covers the actual exam topics with fully explained answers.

Take unlimited free Quiz Course tests of any length. We have free new questions updated every week and you can study our material along with any other study materials.

If You Want to Buy Latest NDT Level 3 Exam Self Study Material, Please Feel Free to contact us.

Buy NDT Level 3 Exam Learning Package Study Material
IN EVERY 10 QUESTIONS 1 QUESTION COMES IN EXAM
WE HAVE LATEST NDT Level III Exam QUESTION BANK
Total 2000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $25.00
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get NDT Level III Training and Certification, Please feel free to contact us.

Leave a Reply