Take A Free ASNT NDT VT Level 1 Exam Practice Test – Quiz Course

by

Take the Free ASNT NDT VT Level 1 Exam Practice test with the latest Visual and Optical Testing Method Question and Answers

1.

A valve that provides linear motion during operation is called:

 
 
 
 

2.

When the scale is partially rolled into the surface of a steel plate it is called?

 
 
 
 

3.

The physical characteristics of color are:

 
 
 
 

4.

A jagged, non-integrally bonded piece of metal that leaves a depression in another metal after it is removed, is called a:

 
 
 
 

5.

A discontinuity associated with metal overflow during forging is called a:

 
 
 
 

6.

Glare can be reduced on an inspection surface by using

 
 
 
 

7.

A common inspection instrument that is used to visually inspect internal bore surfaces is a:

 
 
 
 

8.

A high-intensity source of light may cause an inspection problem because:

 
 
 
 

9.

Steel mill products may have:

 
 
 
 

10.

An attachment to a component that is welded, cast, or forged is called:

 
 
 
 

11.

Devices that restrict the movement of hanger springs and prevent damage during installation are called:

 
 
 
 

12.

The combined static and friction head (vertical difference in elevation) is called:

 
 
 
 

13.

Wear due to erosion/corrosion on a valve is typically found in:

 
 
 
 

14.

Which of the following is a type of component support?

 
 
 
 

15.

A valve is a mechanical device that:

 
 
 
 

16.

Devices that limit or allow no motion in one or more directions are called:

 
 
 
 

17.

Bolting failures typically occur at:

 
 
 
 

18.

The two major categories of pumps are:

 
 
 
 

19.

A mechanical device that raises, transfers, or pressurizes fluids is:

 
 
 
 

20.

A discontinuity that is not associated with welds is:

 
 
 
 

21.

During an examination of a groove weld, which of the following dimensions is normally measured?

 
 
 
 

22.

A welding symbol over the reference line refers to:

 
 
 
 

23.

A valve that uses linear motion, which is used to regulate flow, is called a:

 
 
 
 

24.

A device that restricts movement during an abnormal seismic event is called a:

 
 
 
 

25.

A centrifugal pump is classified as:

 
 
 
 

26.

The device in a pump that moves or compresses fluid is called:

 
 
 
 

27.

The closure element of a diaphragm valve is called:

 
 
 
 

28.

Component supports are divided into groups. Which of the following is not considered to be a group of component supports?

 
 
 
 

29.

During a visual examination, a welding discontinuity that could not be detected would be:

 
 
 
 

30.

For component supports, the principal movement axis is:

 
 
 
 

31.

A device that is typically installed vertically with the support member in tension is called a:

 
 
 
 

32.

A valve subassembly that is considered to be part of the pressure vessel assembly is called the:

 
 
 
 

33.

A device that raises, transfers, or pressurizes fluids by pressing, forcing, or throwing the fluid through apertures or pipes is called a:

 
 
 
 

34.

Valves that use rotational motion to make a seal are called:

 
 
 
 

35.

Service-induced discontinuities can be the result of:

 
 
 
 

36.

A device that is typically installed vertically with the support member in compression is called a:

 
 
 
 

37.

Typical reportable discontinuities for component supports include:

 
 
 
 

38.

A physical attribute that cannot be visually inspected during welding is:

 
 
 
 

39.

An inherent discontinuity in forgings that cannot be detected using visual testing is:

 
 
 
 

40.

Every inspector is affected differently by perception, fatigue, and attitude. In visual inspection, these factors are classified as:

 
 
 
 

41.

To examine areas around bends inside a pipe section, the visual examiner uses a:

 
 
 
 

42.

On a thickness gage, twenty-thousandths of an inch is represented by:

 
 
 
 

43.

In casting, a visual examiner could expect to find:

 
 
 
 

44.

Porosity is:

 
 
 
 

45.

A visual examiner could expect to find a crater crack:

 
 
 
 

46.

A discontinuity with a small star-shaped pattern where a weld starts or stops is usually an indication of:

 
 
 
 

47.

During the visual examination of a full penetration double bevel weld joint, visual examination cannot locate:

 
 
 
 

48.

The initiation of a fatigue crack could occur at:

 
 
 
 
 

49.

A welding discontinuity typically referred to as distortion is caused by:

 
 
 
 

50.

When measuring plate thickness, the most accurate reading is given by a:

 
 
 
 

51.

Visual inspection is the most extensively used inspection method on weldments because:

 
 
 
 

52.

When choosing a magnifier, a major consideration should be given to the?

 
 
 
 

53.

In order to render valid results, the visual examination must include a:

 
 
 
 

54.

The maximum diameter of a borescope that can be used for the test is determined by:

 
 
 
 

55.

A device that provides the means for comparing a test surface to a standard surface finish is called a:

 
 
 
 

56.

An instrument that can be equipped with forward oblique, right angle, or retrospective visual systems is called:

 
 
 
 

57.

The use of chemical solutions to attack material surfaces in order to improve the visibility of discontinuities for visual inspection at normal and low power magnification is called:

 
 
 
 

58.

A “charged coupled device chip” is used with:

 
 
 
 

59.

Cracks, suck-back, undercut, and overlap are discontinuities found in:

 
 
 
 

60.

In welding, weld metal protrusion beyond the fusion line at the weld toe is called:

 
 
 
 

61.

In accordance with SNT-TC-IA, certification of visual NDT personnel is the responsibility of:

 
 
 
 

62.

The ability of a metal to return to its original size and shape after being loaded and unloaded is called:

 
 
 
 

63.

Cracking under the combined action of corrosion and tensile stress is referred to as:

 
 
 
 

64.

A groove formed at the toe or root of a weld when the base metal is melted away and left unfilled by weld metal is referred to as:

 
 
 
 

65.

Excessive clearance in pumps will result in:

 
 
 
 

66.

A mechanical device that controls flow into, inside of, or out of a piping system is called a:

 
 
 
 

67.

Hot tears, inclusions, porosity, and cold shuts are:

 
 
 
 

68.

The distance a magnifier can be moved toward or away from a subject while keeping it in good focus is called:

 
 
 
 

69.

Radiant energy that excites the retina and produces a visual sensation is called:

 
 
 
 

70.

The visible portion of the electromagnetic spectrum extends from:

 
 
 
 

71.

Photometers used to measure the reflectance of materials or surfaces in specialized ways are called:

 
 
 
 

72.

The portion of the eye that regulates the quantity of light admitted is called the:

 
 
 
 

73.

In general, the total magnification of borescopes is in the range of:

 
 
 
 

74.

A method used for copying the topography of a surface that cannot be moved or one that would be damaged in transferal is called:

 
 
 
 

75.

Replication is used for:

 
 
 
 

76.

Temperature-indicating materials can take the form

 
 
 
 

77.

As related to photographic techniques for recording visual testing results, the range of distance over which a camera gives satisfactory definition when its lens is in the best focus for a certain specific distance is referred to as:

 
 
 
 

78.

Cameras used in video pipe testing may be transported inside the pipe by:

 
 
 
 

79.

In general, visual weld inspection is performed:

 
 
 
 

80.

The testing of certain numbers less than the total in a run is called:

 
 
 
 

81.

The undesirable removal of material from contacting surfaces by mechanical action is referred to as:

 
 
 
 

82.

The deterioration of a metal resulting from electrochemical reactions with the environment is referred to as:

 
 
 
 

83.

All of the following are weld joints except:

 
 
 
 

84.

Joint penetration in which the weld metal fills the groove and is fused to the base metal throughout its thickness is referred to as:

 
 
 
 

85.

A process in which materials are joined by heating them to a suitable temperature and by using a filler metal, which liquefies above 449 °C (840 °F) and below the solidus of the base metal, is called:

 
 
 
 

86.

In a typical groove weld, the angle formed between the prepared edge of a member and a plane perpendicular to the surface of the member is called:

 
 
 
 

87.

Bursts, laps, and cracks are discontinuities that are found in:

 
 
 
 

88.

The science of obtaining quantitative measurements of physical objects through processes of recording, measuring, and interpreting photographic images is called:

 
 
 
 

Question 1 of 88

Are You Looking for a Free ASNT NDT VT Level 1 Exam Practice Test?

Free ASNT NDT VT Level 1 Exam Practice Test
Take A Free ASNT NDT VT Level 1 Exam Practice Test – Quiz Course

If your answer is yes then you are at the right website. Here You Can Take a Free Online ASNT NDT VT Level 1 Exam Practice Test and Improve Your ASNT VT Level I – Visual and Optical Testing Method Exam Score. Here You Can Learn everything you need to know about ASNT VT Level I quickly and easily.

In This Practice test, We are covering the Latest ASNT VT Level I – Visual and Optical Testing Method Question and Answers, After completing the last Question you will see the ASNT VT Level I Practice Test Answer Key, No cheating now! Once you complete the test and check your answers please leave us your score and any comments in the comments section below

We will help you to pass the ASNT VT Level I Exam on the first attempt —99% Guaranteed. Our expert-written ASNT VT Level I – Visual and Optical Testing Method Examination practice material covers the actual exam topics with fully explained answers.

Take unlimited free ASNT VT Level I Quiz Course tests of any length. We have free Latest questions updated every week and you can study our material along with any other study materials.

If You Want to Buy Latest ASNT VT Level I Exam Self Study Material, Please Feel Free to contact us.

Buy ASNT VT LEVEL 1 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES INTO THE EXAM
WE HAVE LATEST ASNT VT Level I -Visual and Optical Testing Method QUESTION BANK
Total 2000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $25.00
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact us On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guidelines during learning.
We give you a lot of additional study material Free of cost with this question bank.
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

Take A Free ASNT LEVEL III Exam Practice Test
Latest LPT Level III Question and AnswersLatest MT Level III Question and Answers
Latest RT Level III Question and AnswersLatest UT Level III Question and Answers
Latest ASNT BASIC LEVEL III Question and AnswersLatest VT Level III Question and Answers

If you want to get ASNT VT Level I – Visual and Optical Testing Method Training and Certification, Please feel free to contact us. 

Leave a Reply