API 510 Chapter 6

API 510 Chapter 6 API 572 Inspection of Pressure Vessels

Take a Free API 510 Exam Chapter 6 Practice test with Latest API 572 Inspection of Pressure Vessels Question and Answers

1.

Q1. API 572 section 10.2.1: isolations
What kind of arrangement should be used to isolate a vessel?

 (a) A thick steel plate held on by G-clamps

 (b) The plug-in types used for hydro tests

 (c) A proper ASME blank with the correct pressure/temperature rating

 (d) A ring-flange with a rubber gasket

2.

Q2. API 572 section 10.2.1: other API codes
Which referenced API code deals with special precautions for entering vessels?

 (a) API 579

 (b) API 510

 (c) API 2214

 (d) API 2217A

3.

Q3. API 572 section 10.2.1: other API codes
Which referenced API code deals with the sparking of hand tools?

 (a) API 579

 (b) API 2214

 (c) API 2217A

 (d) API 660

4.

Q4. API 572 section 10.2.1: gas tests
When should a gas test be done on a vessel?

 (a) Only before the issue of the entry permit

 (b) Before the issue of the permit and after DP testing

 (c) Before the issue of the permit and periodically as required

 (d) Before the issue of the permit and before DP testing

5.

Q5. API 572 section 10.2.1: safety man (commonsense)
If an inspector feels faint when inside a vessel, what should the safety man do?

 (a) Get further assistance

 (b) Do a gas test

 (c) Enter the vessel to help the inspector

 (d) All of the above

6.

Q6. API 572 section 10.3.2: ladders and walkways
What is wrong with doing a hammer test on bolts securing walkway plates?

 (a) It can cause the bolt to fail by fatigue

 (b) It can cause the bolt to fail by brittle fracture

 (c) It can make the bolt come loose

 (d) Nothing

7.

Q7. API 572 section 10.3.3: foundations and supports
What is the situation with the settlement of concrete vessel foundations?

 (a) Any settlement at all is unacceptable

 (b) Settlement < 10 mm is acceptable

 (c) Settlement < 20 mm is acceptable

 (d) A nominal amount of even settlement is acceptable

8.

Q8. API 572 section 10.3.6: steel supports
What kind of distortion is most likely on vertical columns supporting a vessel?

 (a) Stretching due to tensile stress

 (b) Shear due to compressive stress

 (c) Buckling

 (d) Torsion (twisting)

9.

Q9. API 572 section 10.3.6: steel supports
What causes corrosion on the inside of vessel skirts?

 (a) High temperatures > 100 8C

 (b) Condensation

 (c) Galvanic cells

 (d) Increased stress owing to the vessel weight acting on the skirt

10.

Q10. API 572 section 10.3.8: nozzles
Which parts of a vessel nozzle assembly are at most risk of failure due to stresses imposed from misaligned pipework?

 (a) The welds

 (b) The flange itself

 (c) The flange bolts

 (d) The nozzle parent material (due to hoop stress)

 Loading …

Question 1 of 10

Click Here To Read Next API 510 Chapter 7 – API 571 Damage Mechanisms

Now try these familiarization questions.

6.8 API 572 section 10 familiarization questions

If You Want to Buy Latest API 510 Exam Self Study Material, Please Feel Free to contact us.

Buy API 510 Exam Learning Package Study Material
FOR EVERY 10 QUESTIONS 1 QUESTION COMES IN THE EXAM
WE HAVE LATEST API 510 Exam QUESTION BANK
Total 5000+ nos QUESTION BANK FROM THEORY TO PRACTICAL TO NUMERICALS.
Cost: $100
Email Us To Buy: upweld.org@gmail.com
Click Here To Contact On Whatsapp https://wa.link/4dn6ee
Ideally, the only material needed for passing the examination. Free guideline during learning.
We give you a lot of additional study material Free of cost with this question bank..
Get BOTH Formats Instantly:
Online—Instant scoring, review & reporting.
Printable—Instant download.

If you want to get API 510 Training and Certification, Please feel free to contact us.